Mikroelektronika MIKROE-724 データシート

mikroBasic PRO for dsPIC30/33 and PIC24

MikroElektronika

283

Cf_Detect

Cf_Enable

Cf_Disable

sub function CF_Detect() as word

Description Checks for presence of CF card by reading the 

chip

 

detect

 pin.

Parameters None.
Returns

- 

1

 - if CF card was detected 

- 

0

 - otherwise 

The corresponding MCU ports must be appropriately initialized for CF card. See Cf_Init.

while (Cf_Detect() = 0)

  nop

dsPIC30 family MCU and CF card voltage levels are different. The user must ensure that MCU’s pin 

connected to CD line can read CF card Logical One correctly.

sub procedure Cf_Enable()

Description Enables the device. Routine needs to be called only if you have disabled the device by means of the 

Cf_Disable routine. These two routines in conjunction allow you to free/occupy data line when working 

with multiple devices.

Parameters None.
Returns

Nothing.

The corresponding MCU ports must be appropriately initialized for CF card. See Cf_Init.

Cf_Enable()

None.

sub procedure Cf_Disable()

Description Routine disables the device and frees the data lines for other devices. To enable the device again, call 

Cf_Enable. These two routines in conjunction allow you to free/occupy data line when working with 

multiple devices.

Parameters None.
Returns

Nothing.

The corresponding MCU ports must be appropriately initialized for CF card. See Cf_Init.

Cf_Disable()

None.