Mikroelektronika MIKROE-724 データシート
506
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
SPI_Ethernet_24j600_Disable
Prototype
sub procedure SPI_Ethernet_24j600_Disable(dim disFlt as word)
Description This is MAC module routine. This routine disables appropriate network traffic on the
ENC24J600
module by the means of it’s receive filters (unicast, multicast, broadcast, crc). Specific type of network
traffic will be disabled if a corresponding bit of this routine’s input parameter is set. Therefore, more
than one type of network traffic can be disabled at the same time. For this purpose, predefined library
constants (see the table below) can be ORed to form appropriate input value.
Parameters -
disFlt
: network traffic/receive filter flags. Each bit corresponds to the appropriate network traffic/
receive filter:
Returns
Nothing.
Requires
Ethernet module has to be initialized. See SPI_Ethernet_24j600_Init.
Example
SPI_Ethernet_24j600_Disable(_SPI_Ethernet_24j600_CRC
or
_SPI_
Ethernet_24j600_UNICAST) ‘ disable CRC checking and Unicast traffic
Notes
Advanced filtering available in the
ENC24J600
module such as
Pattern Match, Magic Packet
and
Hash Table
can not be disabled by this routine.
This routine will change receive filter configuration on-the-fly. It will not, in any way, mess with enabling/
disabling receive/transmit logic or any other part of the
ENC24J600
module. The
ENC24J600
module
should be properly cofigured by the means of SPI_Ethernet_24j600_Init routine.
The
ENC24J600
module should be properly cofigured by the means of SPI_Ethernet_24j600_Init
routine.
Bit
Mask
Description
Predefined library const
0
0x01
MAC Broadcast traffic/receive filter flag. When set, MAC
broadcast traffic will be disabled.
_SPI_Ethernet_24j600_
BROADCAST
1
0x02
MAC Multicast traffic/receive filter flag. When set, MAC
multicast traffic will be disabled.
_SPI_Ethernet_24j600_
MULTICAST
2
0x04
not used
none
3
0x08
not used
none
4
0x10
not used
none
5
0x20
CRC check flag. When set, CRC check will be disabled
and packets with invalid CRC field will be accepted.
_SPI_Ethernet_24j600_CRC
6
0x40
not used
none
7
0x80
MAC Unicast traffic/receive filter flag. When set, MAC
unicast traffic will be disabled.
_SPI_Ethernet_24j600_
UNICAST