Mikroelektronika MIKROE-724 データシート
520
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
- SPI_Glcd_Rectangle
- SPI_Glcd_Rectangle_Round_Edges
- SPI_Glcd_Rectangle_Round_Edges_Fill
- SPI_Glcd_Box
- SPI_Glcd_Circle
- SPI_Glcd_Circle_Fill
- SPI_Glcd_Set_Font
- SPI_Glcd_Write_Char
- SPI_Glcd_Write_Text
- SPI_Glcd_Image
- SPI_Glcd_PartialImage
SPI_Glcd_Init
Prototype
sub procedure SPI_Glcd_Init()
Description Initializes the Glcd module via SPI interface.
Parameters -
Parameters -
DeviceAddress
: SPI expander hardware address, see schematic at the bottom of this page
Returns
Nothing.
Requires
Global variables:
-
SPExpanderCS
: Chip Select line
-
SPExpanderRST
: Reset line
-
SPExpanderCS_Direction
: Direction of the Chip Select pin
-
SPExpanderRST_Direction
: Direction of the Reset pin
must be defined before using this function.
The SPI module needs to be initialized. See SPIx_Init and SPIx_Init_Advanced routines.
Example
‘ Port Expander module connections
dim SPExpanderRST as sbit at LATF0_bit
SPExpanderCS as sbit at LATF1_bit
SPExpanderRST_Direction as sbit at TRISF0_bit
SPExpanderCS_Direction as sbit at TRISF1_bit
‘ End Port Expander module connections
...
‘ If Port Expander Library uses SPI1 module:
SPI1_Init() ‘ Initialize SPI module used with PortExpander
SPI_Glcd_Init(0)
Notes
None.