Mikroelektronika MIKROE-724 データシート
mikroBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
541
SPI_Lcd8_Config
Prototype
sub procedure SPI_Lcd8_Config(dim DeviceAddress as byte)
Description Initializes the Lcd module via SPI interface.
Parameters -
Parameters -
DeviceAddress
: SPI expander hardware address, see schematic at the bottom of this page
Returns
Nothing.
Requires
Global variables:
-
SPExpanderCS
: Chip Select line
-
SPExpanderRST
: Reset line
-
SPExpanderCS_Direction
: Direction of the Chip Select pin
-
SPExpanderRST_Direction
: Direction of the Reset pin
must be defined before using this function.
The SPI module needs to be initialized. See SPIx_Init and SPIx_Init_Advanced routines.
Example
‘ Port Expander module connections
dim SPExpanderRST as sbit at LATF0_bit
SPExpanderCS as sbit at LATF1_bit
SPExpanderRST_Direction as sbit at TRISF0_bit
SPExpanderCS_Direction as sbit at TRISF1_bit
‘ End Port Expander module connections
...
SPI1_Init() ‘ Initialize SPI interface
SPI_Lcd8_Config(0) ‘ Intialize Lcd in 8bit mode via spi
Notes
None.
SPI_Lcd8_Out
Prototype
sub procedure SPI_Lcd8_Out(dim row, column as byte, dim byref text as
string)
Description Prints text on Lcd starting from specified position. Both string variables and literals can be passed as
a text.
Parameters -
row
: starting position row number
-
column
: starting position column number
-
text
: text to be written
Returns
Nothing.
Requires
Lcd needs to be initialized for SPI communication, see SPI_Lcd8_Config routine.
Example
‘ Write text “Hello!” on Lcd starting from row 1, column 3:
SPI_Lcd8_Out(1, 3, “Hello!”)
Notes
None.