Mikroelektronika MIKROE-724 データシート
550
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
SPI_T6963C_setPtr
SPI_T6963C_waitReady
SPI_T6963C_fill
Prototype
sub procedure SPI_T6963C_setPtr(dim p as word, dim c as byte)
Description Sets the memory pointer
p
for command
p
.
Parameters -
p
: address where command should be written
-
c
: command to be written
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_setPtr(SPI_T6963C_grHomeAddr + start, SPI_T6963C_ADDRESS_
POINTER_SET)
Notes
None.
Prototype
sub procedure SPI_T6963C_waitReady()
Description Pools the status byte, and loops until Toshiba Glcd module is ready.
Parameters None.
Returns
Parameters None.
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_waitReady()
Notes
None.
Prototype
sub procedure SPI_T6963C_fill(dim v as byte, dim start, len as word)
Description Fills controller memory block with given byte.
Parameters -
Parameters -
v
: byte to be written
-
start
: starting address of the memory block
-
len
: length of the memory block in bytes
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_fill(0x33,0x00FF,0x000F)
Notes
None.