Mikroelektronika MIKROE-724 データシート
572
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
T6963C_writeCommand
T6963C_setPtr
T6963C_waitReady
Prototype
sub procedure T6963C_writeCommand(dim mydata as byte)
Description Writes command to T6963C controller.
Parameters -
Parameters -
mydata:
command to be written
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
T6963C_writeCommand(T6963C_CURSOR_POINTER_SET)
Notes
None.
Prototype
sub procedure T6963C_setPtr(dim p as word, dim c as byte)
Description Sets the memory pointer
p
for command
p
.
Parameters -
p
: address where command should be written
-
c
: command to be written
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
T6963C_setPtr(T6963C_grHomeAddr + start, T6963C_ADDRESS_POINTER_SET)
Notes
None.
Prototype
sub procedure T6963C_waitReady()
Description Pools the status byte, and loops until Toshiba Glcd module is ready.
Parameters None.
Returns
Parameters None.
Returns
Nothing.
Requires
Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
T6963C_waitReady()
Notes
None.