Secutech Radio modules ST002014 データシート
製品コード
ST002014
Page 10
Security & Electronic Technologies GmbH
SECU-DATA xxxM and also SECU-DATA xxxC have internal block termi-
nals (type: WAGO series 256, ATEX certified) for connection of the corre-
sponding external wires.
Important:
Only qualified personnel with appropriate training and authorisation by the
installation manager is entitled to connect SECU-DATA xxxx to an existing
installation. Adhere to all applicable, local safety regulations.
Hint: For SECU-DATA systems using the SECU-DATA 1500C as a receiv-
er the function of the relay contacts can be reconfigured from make con-
tacts to break contacts, see section Settings-SECU-DATA 1500C relay
configuration on page 25.
Attention: In case of connection problems SECU-DATA maintains the
last valid information on the receiver output. This is valid for the cur-
rent output of SECU-DATA 142X and also for the relay outputs of
SECU-DATA 1500C. For overfill prevention applications with SECU-
DATA 1600M/1700M it is important to ensure the turn-off of pumps in
case of radio failures. This can be achieved by connection the make
contact of Re1 of the SECU-
nals (type: WAGO series 256, ATEX certified) for connection of the corre-
sponding external wires.
Important:
Only qualified personnel with appropriate training and authorisation by the
installation manager is entitled to connect SECU-DATA xxxx to an existing
installation. Adhere to all applicable, local safety regulations.
Hint: For SECU-DATA systems using the SECU-DATA 1500C as a receiv-
er the function of the relay contacts can be reconfigured from make con-
tacts to break contacts, see section Settings-SECU-DATA 1500C relay
configuration on page 25.
Attention: In case of connection problems SECU-DATA maintains the
last valid information on the receiver output. This is valid for the cur-
rent output of SECU-DATA 142X and also for the relay outputs of
SECU-DATA 1500C. For overfill prevention applications with SECU-
DATA 1600M/1700M it is important to ensure the turn-off of pumps in
case of radio failures. This can be achieved by connection the make
contact of Re1 of the SECU-
DATA 1500C in series to the “RF-status”
relay contact.