Olimex Prototype board for STM32F107 CORTEX-M3 microcontroller STM32-P107 STM32-P107 ユーザーズマニュアル
製品コード
STM32-P107
INTRODUCTION
STM32-P107 prototype board provides easy way for developing and prototyping with the new
STM32F107VCT6 connectivity line microcontroller, produced by STMicroelectronics. STM32-
P107 has JTAG port for programming and debugging, USB_OTG, user button, two status LEDs,
and most of the GPIOs are on extension headers where you can connect your additional circuits.
STM32F107VCT6 connectivity line microcontroller, produced by STMicroelectronics. STM32-
P107 has JTAG port for programming and debugging, USB_OTG, user button, two status LEDs,
and most of the GPIOs are on extension headers where you can connect your additional circuits.
BOARD FEATURES
- CPU: STM32F107VCT6 32 bit ARM-based microcontroller with 256 KB Flash, 64 KB RAM,
USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces
- JTAG connector with ARM 2x10 pin layout for programming/debugging
- USB_OTG connector
- USB_HOST connector
- 100Mbit Ethernet
- RS232
- Mini SD/MMC card connector
- UEXT connector
- Power jack
- Two user buttons
- RESET button and circuit
- Two status LEDs
- Power-on LED
- 3V battery connector
- Extension port connectors for many of microcontrollers pins
- PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
- Dimensions: 132.08x96.52mm (5.2x3.8")
USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces
- JTAG connector with ARM 2x10 pin layout for programming/debugging
- USB_OTG connector
- USB_HOST connector
- 100Mbit Ethernet
- RS232
- Mini SD/MMC card connector
- UEXT connector
- Power jack
- Two user buttons
- RESET button and circuit
- Two status LEDs
- Power-on LED
- 3V battery connector
- Extension port connectors for many of microcontrollers pins
- PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
- Dimensions: 132.08x96.52mm (5.2x3.8")
ELECTROSTATIC WARNING
The STM32-P107 board is shipped in protective anti-static packaging. The board must not be
subject to high electrostatic potentials. General practice for working with static sensitive devices
should be applied when working with this board.
subject to high electrostatic potentials. General practice for working with static sensitive devices
should be applied when working with this board.
Page 3 of 19