Olimex Development board for STM32F407ZGT6 CORTEX-M4 microcontroller STM32-H407 STM32-H407 ユーザーズマニュアル

製品コード

STM32-H407

STM32-H407 user's manual

The default positions are B0_0 and B1_0 (Boot from User Flash Memory).

6.11.3 R-T

This is SMD type jumper.

If you close/solder this jumper RST and TRST at the JTAG will be connected.

The default position is open/unsoldered.

6.11.4 3.3V_E

This is SMD type jumper.

Board digital power will be disabled if open/unsoldered

The default position is closed.

6.11.5 AGND_E

This is SMD type jumper.

If open/unsoldered will disable analog ground.

The default position is closed.

6.11.6 AREF_EN

This is SMD type jumper.

If open/unsoldered will disable ADC reference.

The default position is closed.

6.12 Additional hardware components

The components below are mounted on STM32-H407 but are not discussed above. They are listed
here for completeness:

Reset button - used for hardware reset of the board

WKUP button – can be used as user button

User LED + Power LED

Page 20 of 28