STMicroelectronics Discovery kit for STM32 F030 Value line - with STM32F030R8 MCU STM32F0308-DISCO STM32F0308-DISCO データシート
製品コード
STM32F0308-DISCO
DocID025326 Rev 1
UM1677
MDK-ARM toolchain
17
If you need to change your project settings (Include and preprocessor defines), you need
just to go through project options:
just to go through project options:
–
For Include directories'
Project>Options for Target > C/C++ > Include Paths
–
–
For pre-processor defines
Project>Options for Target > C/C++ > Preprocessor symbols > Define
5. In the MDK-ARM IDE, from the Debug menu, select Start/Stop Debug Session or,
alternatively, click the Start/Stop Debug Session button the in toolbar, to program the
Flash memory and begin debugging.
Flash memory and begin debugging.
Figure 10. Start/Stop Debug Session button
6. The debugger in the MDK-ARM can be used to debug source code at C and assembly
levels, set breakpoints, monitor individual variables and watch events during the code
execution.
execution.
Figure 11. MDK-ARM debuger screen
To run your application, from the Debug menu, select Run. Alternatively, click the Run
button in the toolbar to run your application.
button in the toolbar to run your application.
Figure 12. Run button