Reely 1:8 RC model car Nitro Buggy 1314019 データシート

Operation of the vehicle requires various accessories that is not part of the delivery of the vehicle. An experienced 

RC model driver will surely have the components described below in his possession already. A newcomer to the 

carburettor model car sport, however, needs to purchase the following accessories to use the vehicle delivered here:
•  Rechargeable batteries or batteries for the transmitter (for type and required number, see operating instructions for

the remote control system)

•  Receiver battery (Hump pack 5 cells, 6 V, at least 1300 mAh recommended)
•  Glow-plug starter with battery
•  Charger for transmitter, receiver and/or glow plug starter battery
•  Glow plug wrench
•  Air filter oil
•  Tank bottle
•  Model fuel for RC vehicles, methanol/oil based
•  Afterrun oil

  The spare parts list can be found on our website www.conrad.com in the download section for the respective 

product. 

 

Alternatively, you may also call to request the list of spare parts. For contact information, see the chapter 

„Introduction“ at the beginning of these operating instructions.

We also recommended the following components for best use of the vehicle:
•  Starting box (serves easier starting of the engine by an electrically powered rubber flywheel and easier mainte-

nance/test runs)

•  Electricall model fuel pump (for filling and emptying the tank)
•  Additional glow plugs, is required with different fuel value (to replace if worn or for operation with different RC model

car fuels or cold/hot ambience temperatures or different humidities)

•  Tools (e.g. Socket wrenches for wheel change, screwdriver)
•  Compressed air spray (for cleaning purposes)
•  Spare tyres (to be able to quickly change run-down/damaged tyres)

  If the enclosed remote control system does not have an integrated fail safe function (see separately enc-

losed operating instructions on the remote control system), we also recommend a separate fail safe that is 

inserted between receiver and throttle/brake servo. 

 

If the transmitter signal fails, the fail-safe moves the throttle/brake service, e.g. into the neutral position or 

operates the brake, so that the vehicle cannot drive on uncontrolled and there will not be any accident.