Reely 4WD RtR 2.4 GHz GSC4283BBDGOG. データシート

  The manual for the remote control system is included separately. Always observe all safety information 

included in it as well as any other information!

•  Only use suitable drive batteries for the vehicle. Never operate the speed controller with a mains adapter, not even

for test purposes.

  This vehicle is only suitable for use with a LiPo drive battery with 2 cells (nominal voltage 7.4 V), a LiFe drive 

battery with 2 cells (nominal voltage 6.6 V) or a NiMH drive battery with 6 cells (nominal voltage 7.2 V).

When using a drive battery with more cells, there is a danger of fire from overheating of the speed controller.

Apart from this, the vehicle‘s drive will be overloaded and damaged by this (e.g. differential). Loss of gua-

rantee/warranty!

 

Before commissioning of the vehicle, the speed controller must be programmed to the battery type used 

(LiPo, LiFe or NiMH), see chapter 11.

•  When putting the device into operation, always turn on the transmitter first. Only then must the vehicle‘s drive battery

be connected with the speed controller and the speed controller switched on. Otherwise, the vehicle may show 

unpredictable responses! 

 

Place the vehicle on an appropriate support before connecting the drive battery so that the wheels can turn 

freely. 

 

Switch off the speed controller (switch position „OFF“).

 

Switch on the transmitter if you haven’t done it already. Check its function (e.g. operation display of the 

transmitter). 

 

Put the trimming for the throttle/brake function at the transmitter into the centre position.

 

Now connect a fully charged drive battery to the speed controller. 

 

Switch on the speed controller only now (switch position „ON“). Wait for a few seconds until the speed 

controller has completed its self-test.

 

Programme the battery type used (LiPo, LiFe or NiMH), see chapter 11.

•  Check that the vehicle reacts to remote control commands as expected (steering and drive) before taking it from the

support and placing it on the ground with its wheels. 

•  Improper operation can cause serious damage to people and property! Only drive with the model directly in view.

This is why you shouldn’t drive at night. 

•  Only drive when your ability to react is unimpaired. Tiredness or the influence of alcohol or medication can cause

incorrect responses, just as with real vehicles.

•  Please note that this model car must not be driven on public roads, places or streets. Also do not operate it on

private grounds without the owner‘s permission.

•  Don’t drive towards animals or people!
•  Avoid driving at very low outdoor temperatures. Plastic parts lose elasticity, which may lead to damage even in a

light accident.