Reely 4WD RtR 2.4 GHz GSC4283BBDGOG. データシート

Description of the programming modes:
Programming mode 1: „Reverse Power“
In this programming mode, reverse operation can be deactivated or the maximum speed for reversing can be set.
Green LED flashes 1x:  Reversing function off
Green LED flashes 2x:  Slow reverse speed
Green LED flashes 3x:  Medium reverse speed
Green LED flashes 4x:  High reverse speed
Programming mode 2: „Start Power“
In this programming mode, the start-up power or acceleration when starting to drive can be set. Observe that the 

entire drive is subject to higher strain at a very high start-up torque. 
Green LED flashes 1x:  Low start-up torque
Green LED flashes 2x:  Medium start-up torque
Green LED flashes 3x:  High start-up torque
Green LED flashes 4x:  Very high start-up torque
Programming mode 3: „Drag Brake“
If you put the throttle/brake lever at the transmitter in the neutral position, the motor brake is activated. The vehicle 

decelerates more the higher the programmed value. The function corresponds to the motor braking function in a „real“ 

car when you take your foot off the throttle pedal, but do not push the brake pedal yet.
Green LED flashes 1x:  Drag brake off
Green LED flashes 2x:  Low drag brake settings
Green LED flashes 3x:  Medium drag brake settings
Green LED flashes 4x:  High drag brake settings
Programming mode 4: „Battery Type“
Set the type of the drive battery used by you here. If the setting is incorrect then the speed controller or the recharge-

able battery may be damaged (e.g. excessive discharging of a LiPo rechargeable battery). 
When selecting the battery type, the respective undervoltage recognition is also selected automatically. If the respec-

tive deactivation voltage is undercut, the speed controller switches off the motor.
Green LED flashes 1x:  Automatic undervoltage recognition: After activation, the speed controller measures the bat-

tery voltage. The deactivation voltage is 70% of the measured value. 

Green LED flashes 2x:  NiCd or NiMH battery (6 cells): Deactivation voltage 5.4 V
Green LED flashes 3x:  LiPo battery (2-cells): Deactivation voltage 6.0 V
Green LED flashes 4x:  LiFe battery (2-cells): Deactivation voltage 4.8 V