Reely 1:10 RC model car Electric Truggy FS-53328-6 ユーザーズマニュアル

As is done with the front control arms, make sure that the alignment of the axle legs is correct. Pay attention to the
small bar on the side of the axle leg.

Part "B9-L" is the left rear axle leg. Part "B9-R" is the right rear axle leg. After the installation of the control arms, the
small bar on the side points towards the vehicle rear.

The upper control arm "B8" is preinstalled. Do not confuse it with the servo rod or the two steering links.

The upper control arms are installed at the axle legs using an "S4" screw (M3x12mm) each. Make sure that the upper
control arm is installed on the correct side of the axle leg (see illustration above). Otherwise, the control arms will be
chafing on the shock absorbers and interfere with the suspension.