Reely RC model speedboat RtR 640 mm BS077A-G データシート

Open the body cover. 
The drive battery (1) must be attached to the bottom of the body with hook-and-loop tape so that it will be kept secure 

in its position even in rough operation 
The battery should be mounted as close to the motor holder (2) as possible for best running properties.

  Observe tight fit of the rechargeable battery. We recommend that the battery be attached to the wood board 

with an additional strip of hook-and-loop tape taped into the boat body, rather than only those present. 

 

The material required for this is not part of the delivery and must be procured separately. 

 

Figure 5 also shows the plug-in connection between the drive controller and the rechargeable battery (3).