Reely RC model speedboat ARR 700 mm BS016A データシート
製品コード
BS016A
26
5. Scope of Delivery
• Ship’s body with removable hull deck
• Boat stand
• Operating instructions
Required for operation (not enclosed, must be ordered separately):
• 3-cell LiPo driving battery (rated voltage 11.1 V), capacity min. 2500 mAh, discharge rate 25C
• Charger for the driving battery
• 2-channel remote control (2.4 GHz recommended)
• Batteries for the transmitter
• Steering servo (at least 60 Ncm actuating power)
• We also recommend keeping one or several replacement ship propellers ready.
Required for setup of the model (not enclosed):
• Double-sided adhesive tape (e.g. servo tape or hook-and-loop tape) for attaching the receiver
• Various tools (e.g. screwdriver, cutter knife)
• Viscous superglue or 5-minute epoxy resin
See our catalogues at www.conrad.com for tried and tested accessories.
6. Safety Information
In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
guarantee will expire. We do not assume any liability for consequential damage!
We do not assume any liability for damage to property or personal injury caused by improper use or
the failure to observe the safety instructions! In such cases the warranty/guarantee will expire.
the failure to observe the safety instructions! In such cases the warranty/guarantee will expire.
Warranty and guarantee also shall not cover normal wear and accident damage (e.g. broken ship propellers
or drive or remote control parts with water damage).
or drive or remote control parts with water damage).
Dear customer, these safety instructions are not only for the protection of the product but also for your own
safety and that of other people. Therefore, read this chapter very carefully before taking the product into
operation!
safety and that of other people. Therefore, read this chapter very carefully before taking the product into
operation!