Tams Elektronik 40-19407-01-C Booster B-4 40-19407-01-C データシート
製品コード
40-19407-01-C
English
B-4
Page 22
1. Why Boosters?
Boosters amplify the digital signals sent from the control unit and
supply a connected track with power. In layouts monitored by
RailCom
supply a connected track with power. In layouts monitored by
RailCom
®
the booster also provides the so-called RailCom-cutout
needed to transfer RailCom-feedback data.
You can measure the power consumption as follows:
You can measure the power consumption as follows:
§
a locomotive: Gauge N: 600 mA / Gauge H0: 800 mA / > Gauge 0: 1 A
§
a wagon light: 50 - 200 mA
§
another consumer (such as a sound module): 100 - 300 mA
§
reserve for points: 10% of the calculated sum of power
consumption
consumption
The Booster B-4 can provide 2 to 5 A current depending on the
settings. If your overall power demand exceeds the capacity of one
booster you have to connect additional boosters according to the
special requirements of your layout.
settings. If your overall power demand exceeds the capacity of one
booster you have to connect additional boosters according to the
special requirements of your layout.
2. Getting started
Checking contents
Please make sure that your package contains:
Please make sure that your package contains:
§
Booster B-4
§
one 3-pin and one 4-pin connector
§
five short-circuit jumpers
§
this manual.
Required materials
In order to connect the booster you need:
In order to connect the booster you need:
§
Wire. Recommended diameter:
for connecting the 4-pin connector to the transformer and the rails:
> 1,5mm²
for connecting the 3-pin connector to the digital control unit:
> 0,25 mm²
for connecting the 4-pin connector to the transformer and the rails:
> 1,5mm²
for connecting the 3-pin connector to the digital control unit:
> 0,25 mm²