Tams Elektronik 40-19417-01-C Booster B-4, with display 40-19417-01-C データシート
製品コード
40-19417-01-C
B-4
English
Page 23
!
!
§
A transformer. The recommended voltage and the minimum power
of the transformer depend on the desired settings.
Determining the necessary transformer´s voltage:
of the transformer depend on the desired settings.
Determining the necessary transformer´s voltage:
Desired track voltage
Recommended transformer´s voltage
10 – 12 V
12 V
12 – 15 V
15 V
15 – 18 V
16 V
18 – 22 V
18 V
> 22 V
20 V
Determining the transformer´s minimum power:
Desired track voltage x desired interrupting current
= minimum transformer´s power
= minimum transformer´s power
Example: 18 V x 3 A = 54 VA
Please note:
Use a transformer with a nominal voltage not much higher than the
desired track voltage. The power resulting otherwise has to be
dissipated as heat by the booster. When this power is too high, the
booster overheats and switches off.
desired track voltage. The power resulting otherwise has to be
dissipated as heat by the booster. When this power is too high, the
booster overheats and switches off.
Saftey instructions
The booster should only be used in digital model railways in
concordance with these instructions. It is not suitable for use by
children under 14. Incorrect use can be dangerous.
The booster should only be used in digital model railways in
concordance with these instructions. It is not suitable for use by
children under 14. Incorrect use can be dangerous.
Risk of fire
The booster is cooled by a ventilating fan to prevent overheating. Thus
be careful to allow the air to flow unhindered through the ventilation
slits at the booster´s top and back surface. If the vents are blocked
components can overheat and catch fire.
be careful to allow the air to flow unhindered through the ventilation
slits at the booster´s top and back surface. If the vents are blocked
components can overheat and catch fire.