ION Audio Ion Block Rocker Bluetooth black 101681 データシート

製品コード
101681
ページ / 21
 
DIAGRAM AND PARTS DESCRIPTION
 
 
1.
 
Instrument / Microphone 
Input with Volume Control 
(1/4"):  
This mono input 
accepts a 1/4" input such as a 
microphone, guitar, or other 
musical instrument. 
2.
 
iPod/Auxuliary input with 
Volume Control (Stereo 
RCA):  
This knob controls the 
level of the iPod and the RCA 
input.    This stereo RCA input 
can be used to connect a CD, 
MP3, or other audio source.  
To connect to a portable device 
with a 1/8" headphone jack, 
you need a standard (1/8" to 
RCA)  adapter which is NOT 
included. 
3.
 
Master Volume Control: This 
knob controls the master volume of the BLOCK ROCKER. 
4.
 
Power Adapter (IEC): Insert the included power cable here to charge the unit.  Note that the BLOCK ROCKER 
can run off the power adapter while it simultaneously charges the battery.  The charge indicator illuminates 
when the battery is charging. 
5.
 
Voltage Selector*: Set this to the correct voltage for 
your location standard. 
6.
 
Power ON/OFF Switch: Turns BLOCK ROCKER on or 
off.  Please note that while BLOCK ROCKER is 
connected to a power source, it does not need to be 
powered on to charge the battery. 
7.
 
Link Output: This 1/4" jack is a stereo line level output 
that can be connected to the stereo input of an amplifier or amplified loudspeaker such as another BLOCK 
ROCKER. 
8.
 
Battery Level Indicator: While the unit is powered ON, these four lights indicate the power left in the battery.  
Battery life varies based on volume and usage. 
9.
 
iPod Charging Switch: Turn on iPod charging by setting this switch to the "Charge iPod" position. 
 
IMPORTANT NOTES 
 
Use this troubleshooting guide if:  The sound is distorted at high volumes
 
 
Input is clipping:  Try lowering the input gain or the volume control on your sound source or music instrument. 
 
Output is clipping:  Lower the main volume level. 
 
There is too much bass:  Try adjusting the tone or EQ control on your sound source to lower the bass level.  
This will allow you to play the music louder before clipping (distortion) occurs. 
 
The link cable: is being plugged into the instrument or MIC input instead of the RCA line input. 
 
Important:  With all large speakers, an initial "break-in" period is needed to perform at optimal levels.  To 
properly "break-in" your BLOCK ROCKER, play an audio source at medium volume for a few hours. 
 
SPECIFICATIONS 
 
Input Voltage: AC 100-120V/ 60Hz  220-240V/ 50Hz  
Input Wattage: 50W 
Output Wattage: (RMS) 18W, 1%THD, (Peak)  22W  
Frequency Response (±3dB): (Aux) 90Hz-20kHz, (iPod) 77Hz-20kHz  
Bottom pole mount specifications: Standard Pole Mount found at professional audio retailer: 
Depth 80mm (3.15") 
Diameter 35.5mm (1.40") 
Time required to fully charge the BLOCK ROCKER: under 4 hours  
Battery life: Over 12 hours* at full volume of the BLOCK ROCKER when fully charged. 
 
*Note: Battery life may vary based on temperature, age, and volume usage of product. 
* WARNING:  U.S. users should set this 
switch to "100-120V" whereas U.K. and most 
European users should set this to "220-
240V."  Selecting the improper voltage can 
damage the unit.
1
1
5
6
7
8
9
2
3
4