Mc Crypt X-over 85 active switch 310730 データシート
製品コード
310730
31
Maintenance
a) Fuse Replacement
If you have to replace the fuse, ensure that you only use fuses of the specified type and rated current (see “Technical
Data”) as a replacement.
Data”) as a replacement.
Never repair fuses or bridge the fuse holder.
When replacing the fuse, ensure that the correct fuse value is used according to the device
voltage set (see “Technical Data”).
voltage set (see “Technical Data”).
• Unplug the mains plug from the mains socket and from the mains connection on the device.
• Use a suitable screwdriver to carefully turn out the fuse holder (14) with the defective fuse. For this, slightly press
on the fuse cap and turn it counter-clockwise.
• Remove the defective fuse and replace it with a new fuse of the indicated type.
• Carefully replace the fuse holder (14) with the new fuse in the device. For this, slightly press on the fuse cap and
turn it counter-clockwise until it catches again.
• After this, you can reconnect the device to the mains and take it into operation.
b) Cleaning
Clean the exterior of the device with a soft, dry cloth or brush only.
Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the casing.