3D Systems Cube 381000 データシート
製品コード
381000
53
MAINTAINING YOUR Cube
26
Cleaning the Exterior
Clean the Cube’s exterior with a lint free cloth and water.
Dampen the cloth with water and wipe the outer surfaces of
any debris that is visible.
Dampen the cloth with water and wipe the outer surfaces of
any debris that is visible.
Cleaning the Print Pad
6XEPHUJHSULQWSDGLQDFRQWDLQHU¿OOHGZLWKZDUPFLW\ WDS
water. Please do not use well water; it contains certain min-
HUDOVWKDWPD\PDNH\RXUFUHDWLRQGLI¿FXOWWRUHPRYHIURP
the print pad.
water. Please do not use well water; it contains certain min-
HUDOVWKDWPD\PDNH\RXUFUHDWLRQGLI¿FXOWWRUHPRYHIURP
the print pad.
Rinse pad under tap water and dry using a lint free wipe.
Cleaning the Print Tip
WARNING –
PRINTJET NOZZLE TIP
BECOMES EXTREMELY HOT DUR-
ING SET-UP AND OPERATION. DO
NOT TOUCH NOZZLE.
ING SET-UP AND OPERATION. DO
NOT TOUCH NOZZLE.
Using the small pliers, pull away any plastic debris away from the nozzle tip.
If the debris is stubborn, the nozzle may need to be heated to make the debris soft
enough to remove.
enough to remove.