3D Systems CubeX CUBEX データシート

46

2.  Tap “Print” on the touchscreen and use left or right arrows until you see your Cube file displayed.

4.  The Cube will begin a ten minute heating process. During the heating process, the print tip and the print pad will reach 

the temperatures that have been preset  by the manufacturer. Once these temperatures are reached, your creation will 

begin to print. Once the creation is finished printing, your touch screen will display “Print Finished,” press the check box

to confirm. Wait until the print pad is completely cool before removing your print.

3.  Tap on your .Cube file; the print touchscreen will appear showing the total time it will take to print your creation and the

time left to complete it during printing. It also shows the maximum height of your creation and the current height while 

printing. 

To abort your creation during warm up or printing, finger tap the STOP button on touchscreen. The next screen will read

“Are you sure you want to abort the print?” Finger tap the check box to abort or tap the 

X box to cancel. Wait until the print 

tip and the print pad completely cools before touching.