Novatek MULTIFUNCTIONAL 2-CH TIME RELAY REV-201M REV-201M データシート
![Novatek](https://files.manualsbrain.com/attachments/e7e049247902958319c87400a95602e9d5c76a1e/common/fit/150/50/4efcb7943c0756506dbdd19651176aa58c09c099bf8b7ebc5da725a21ffc/brand_logo.gif)
製品コード
REV-201M
- 4 -
approximately 250 milliseconds. This happens due to smooth voltage increase on the power supply source of
REV-201M. Kindly see Figure 2 below for more details.
REV-201M. Kindly see Figure 2 below for more details.
1 – Voltage growth curve on the REV-201M input power supply
2 – Curve showing the triggering time for the output terminals when the REV-201M
has minimal (zero) time delay settings.
2 – Curve showing the triggering time for the output terminals when the REV-201M
has minimal (zero) time delay settings.
Figure 2 – Initialization time for REV-201M after the power supply is given to the device input terminals
1.2.3.1 Turn ON time delay
Figure 3 – Turn ON time delay
Timing countdown on each channel starts from the moment when the power supply source is applied to
the input terminals «L1-N», (Channel 1); «L2-N», (Channel 2). Time delay setting is selected using the knobs
of potentiometers. Each channel has two adjustable knobs: Т1 and Т2. Time delay for the output contacts
triggering of is determined as the sum of the values adjusted by both knobs for each channel separately.
of potentiometers. Each channel has two adjustable knobs: Т1 and Т2. Time delay for the output contacts
triggering of is determined as the sum of the values adjusted by both knobs for each channel separately.
When the power supply is present – GREEN LED starts glowing and timing countdown begins. After the
expiry of time delay interval – RED LED turns on and the output contacts change the position to the ON state.
1.2.3.2 Impulse operation mode
Figure 4 – Impulse operation mode
Timing countdown on each of the channels starts from the moment the power is applied to the terminals
«L1-N», (Channel 1); «L2-N», (Channel 2).
When the power supply is given – on the channel GREEN LED starts glowing and countdown begins. Time
delay intervals are adjusted using the knobs 3 and 8 (Figure 1.) in the diapason T2 for the Channel 1 and
Channel 2 respectively – pause time.
Channel 2 respectively – pause time.
After the turn ON time delay expiry REV-201M turns ON for the time determined by the knobs 2 and 7
(Figure 1) in the diapason T1 – LED indicator change the color to RED.
REV-201М
NOVATEK- ELECTRO
“ ”
Position of DIP switches A
“ ”
Position of DIP switches A
IDLE
IDLE
terminal
s
s
V
V
termin
als
V
ms