Ziehl T224071 TR 210 Electronic Temperature Monitor And Controller TR 210 T224071 データシート
製品コード
T224071
datum / name : 13.12.2007 Fu
Z. Nr.: 1185 0710.4
Page 4 of 24
Type: TR 210
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
Programs
9 programs (Pr), that are preset ex works, can be selected. Due to these programs, the
device can be adapted very easily to the application.
Choose the program, which fits to your application and after that change the parameters! In
case of changing the program, each parameter is being resetted to "factory setting".
(see chart " factory setting")
Choosing the programs:
When applying the power supply hold the pushbutton Set for 10 s. Then the program
(Pr 1 ... Pr 9) can be selected with the pushbuttons up/down and confirmed with Set.
device can be adapted very easily to the application.
Choose the program, which fits to your application and after that change the parameters! In
case of changing the program, each parameter is being resetted to "factory setting".
(see chart " factory setting")
Choosing the programs:
When applying the power supply hold the pushbutton Set for 10 s. Then the program
(Pr 1 ... Pr 9) can be selected with the pushbuttons up/down and confirmed with Set.
Pr
Input
Limit value
1*
1 temperature sensor
2
2
2 temperature sensors
1 per sensor
3
1 temperature sensor
2 day and 2 night
4
2 temperature sensors
1 day and 1 night per sensor
5
2 temperature sensors
2 difference temperature
6
1x 0-10 V or 0/ 4-20 mA
2
7
2x 0-10 V or 0/ 4-20 mA
1 per input
8
2x 0-10 V or 0/4- 20 mA
2 difference
9
2 temperature sensors
2 MIN/MAX
* factory setting
Please note:
Pr 1, 2, 5-9: Y1 / Y2 = remote – reset (external)
Pr 3+4:
Y1 / Y2 = switching day / night
Important Information
To use the equipment flawless and safe, transport and store properly, install and start
professionally and operate as directed.
Only let persons work with the equipment who are familiar with installation, start and use
and who have appropriate qualification corresponding to their function. They must
observe the contents of the instructions manual, the information which are written on the
equipment and the relevant security instructions for the setting up and the use of electrical
units.
The equipments are built according to DIN / EN and checked and leave the plant
according to security in perfect condition. To keep this condition, observe the security
instructions with the headline „Attention“ written in the instructions manual. Ignoring of the
security instructions may lead to death, physical injury or damage of the equipment itself
and of other apparatus and equipment.
If, in any case the information in the instructions manual is not sufficient, please contact
our company or the responsible representative.
Instead of the industrial norms and regulations written in this instructions manual valid for
Europe, you must observe out of their geographical scope the valid and relevant
regulations of the corresponding country.
professionally and operate as directed.
Only let persons work with the equipment who are familiar with installation, start and use
and who have appropriate qualification corresponding to their function. They must
observe the contents of the instructions manual, the information which are written on the
equipment and the relevant security instructions for the setting up and the use of electrical
units.
The equipments are built according to DIN / EN and checked and leave the plant
according to security in perfect condition. To keep this condition, observe the security
instructions with the headline „Attention“ written in the instructions manual. Ignoring of the
security instructions may lead to death, physical injury or damage of the equipment itself
and of other apparatus and equipment.
If, in any case the information in the instructions manual is not sufficient, please contact
our company or the responsible representative.
Instead of the industrial norms and regulations written in this instructions manual valid for
Europe, you must observe out of their geographical scope the valid and relevant
regulations of the corresponding country.