Phoenix Contact 2701027 NLC-050-024D-06I-04QTP-00A nanoLine Base Unit 24ßV/DC / PNP 2701027 データシート
製品コード
2701027
Running Projects and Controlling the nanoLC
2373_en_B
PHOENIX CONTACT
6-3
6
Running Projects and Controlling the nanoLC
This chapter shows how to prepare a nanoNavigator project to run it, how to transfer a
project to or from the nanoLC, and how to start and stop execution on the nanoLC. Note that
we discuss running a project, not just a flow chart. Whenever updating a flow chart or closing
a project, nanoNavigator ensures that it is error-free (as far as it can tell without actually
executing the project). Projects are always ready to download to the connected nanoLC for
execution.
6.1
Specifying the PC Connection
Before transferring a project to or from the nanoLC, starting or stopping the project,
monitoring it, or performing any other operations on the nanoLC, nanoLC and the PC must
be physically connected. Follow these steps:
1.
Verify that there is a physical connection between the nanoLC and the PC.
2.
Select the “File... Connection Settings” menu to display the “Connection Settings”
dialog box (see Figure 6-1). This dialog box permits selection of a COM port for the
connection to the nanoLC, and permits specification of a serial port for a nanoLC
memory module.
Figure 6-1
“Connection Settings” dialog box
3.
Use the “Primary Communication” drop-down list to select from among the available
COM ports on the PC.
Once selected, upload or download projects from or to the
For more information on making a physical connection between the nanoLC and a PC,
see the “nanoLC Hardware User Manual.”
The nanoLC Memory Module doesn’t require a physical connection between the nanoLC
and the PC, so you can skip step 1 if you are just defining a connection to a nanoLC
Memory Module.
If the nanoLC has a USB Base Unit Option module, a USB cable connects the nanoLC to
the PC. The nanoNavigator installation automatically installs a special driver to treat the
USB port on the PC as a COM port. The USB port appears as a COM port in this drop-
down list.