Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
76
Operating Instructions, 06/2014
Error messages
LOGO!Soft Comfort aborts the transfer and displays an error message if the LOGO! Base
Module does not have enough resources for program transfer. The error dialog displays
unknown LOGO! versions prompts you to continue or cancel the download.
The status bar displays transfer messages and the Info Window displays transfer messages
The status bar displays transfer messages and the Info Window displays transfer messages
as well as detailed error messages.
Layout recovery (0BA8 only)
When you download a circuit program (FBD only) to your LOGO! Base module, LOGO!Soft
Comfort also downloads the program layout. The LOGO!Soft Comfort reads the layout
information and recovers it automatically when you open it again.
The layout memory size in a LOGO! Basic is up to 30 KB. You can check the available
The layout memory size in a LOGO! Basic is up to 30 KB. You can check the available
memory size from the info window by determining LOGO! (Page 90) before saving a circuit
diagram.
2.8.5.3
Tools -> Transfer -> LOGO! -> PC
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
→Tools → Transfer: LOGO! → PC
You can use this menu command to upload a circuit program created with the LOGO!Soft
Comfort from PC to the LOGO! Base Module. You can also use the button in the standard
Cutting connections
If you have set the "Cut connections during import/upload" check box under Tools → Options:
Cut connections (Page 121), LOGO!Soft Comfort cuts the relevant connections during the
upload from LOGO! to the PC according to the rules set in this dialog.
Password
When you upload a password-protected circuit program from LOGO! to the PC, LOGO!Soft
Comfort prompts you to enter a password. If you do not enter the correct password,
LOGO!Soft Comfort aborts the transfer and displays an error message.