Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
79
2.8.5.10
Tools -> Transfer -> Configure Network Address (0BA7 and 0BA8 only)
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
With this menu command, you can change the IP address, subnet mask and default gateway
With this menu command, you can change the IP address, subnet mask and default gateway
of the LOGO! Base Module:
Click "
①
" to implement the change.
2.8.5.11
Tools -> Transfer -> Configure Master/Slave Mode (0BA7 and 0BA8 only)
LOGO!Soft Comfort requires that you confirm the connection interface for each
communication attempt. See "Tools -> Transfer (Page 70)" for complete information.
Use this menu command to switch a LOGO! Base Module between master mode and slave
Use this menu command to switch a LOGO! Base Module between master mode and slave
mode.
If you set the connected LOGO! Base Module to slave mode, you must enter the destination
If you set the connected LOGO! Base Module to slave mode, you must enter the destination
IP address of the module: