Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
98
Operating Instructions, 06/2014
2.8.5.26
Tools -> Connect Modem - Select Modem
From the Select modem dialog, you can select check boxes to configure the remote modem
or the local modem. The remote modem is the one connected to the LOGO! Base Module
and the local modem is the one connected to the computer with LOGO!Soft Comfort.
If you have previously configured the remote modem or the local modem from LOGO!Soft
If you have previously configured the remote modem or the local modem from LOGO!Soft
Comfort, the dialog displays the name of the modem as configured from LOGO!Soft Comfort.
You can click "Detail" to display specific information about the LOGO!Soft Comfort
configuration of a modem.
If you have configured the remote modem by some means other than LOGO!Soft Comfort,
If you have configured the remote modem by some means other than LOGO!Soft Comfort,
you can disregard the displayed settings. LOGO!Soft Comfort will use the configuration in
the actual modem. If you have not yet configured the remote modem, or choose to change
the existing configuration, then select the Remote modem check box.
For the local modem, LOGO!Soft Comfort will use the settings as displayed by the "Detail"
For the local modem, LOGO!Soft Comfort will use the settings as displayed by the "Detail"
button, or you can select the Local modem check box to edit the configuration.
If you need to configure or change the configuration of both modems, then select both check
If you need to configure or change the configuration of both modems, then select both check
boxes.
If you have already configured both modems but need to set the telephone number, do not
If you have already configured both modems but need to set the telephone number, do not
select the check boxes. When you click "Next", you will advance to the telephone number
configuration (Page 99) dialog. Otherwise, when you click "Next", you will proceed to
configuration of the selected modems.
2.8.5.27
Tools -> Connect Modem - Select Remote Configuration
From the Select remote configuration dialog, you select whether to edit or delete an existing
configuration, if one exists, or to create a new configuration.
Click "Next" to continue with modem configuration.
Click "Next" to continue with modem configuration.
2.8.5.28
Tools -> Connect Modem - Configure Remote Modem Command
From the Configure remote modem command dialog, you can use the name of the remote
modem to access and configure a remote modem. You can select the check box to accept
the default settings for the modem commands, or you can choose not to use the defaults and
to edit the individual commands. The "Additional" field provides the opportunity to enter other
modem commands. Separate each one with a blank if you add additional commands.
The commands are all standard commands. Refer to the documentation provided with your
The commands are all standard commands. Refer to the documentation provided with your
modem for specific command syntax.
Click "Save Configuration" to save this configuration for the remote modem.
Click "Save Configuration" to save this configuration for the remote modem.
2.8.5.29
Tools -> Connect Modem - Configure Remote Modem
The Configure remote modem dialog is the last dialog for you to complete remote modem
configuration. After you ensure that the remote modem is connected to the LOGO! Base
Module, follow these steps:
1. Select the "Done" check box.
2. Select the communications port to use.
3. Click "Configure remote modem".
LOGO!Soft Comfort will complete the modem configuration and display a status message.
2. Select the communications port to use.
3. Click "Configure remote modem".
LOGO!Soft Comfort will complete the modem configuration and display a status message.