Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
Tutorial
3.2 Getting started with program creation
LOGO!Soft Comfort Online Help
138
Operating Instructions, 06/2014
You can also cut a group of connections, using the Edit → Cut Connections menu command.
Before you cut any connections, you can also set the cutting criteria, for example, cut all
connections routed through blocks.
Example for the FBD Editor:
Example for the FBD Editor:
The connection is closed again by clicking on its open end while the Cut/Join tool is active.
Optionally, you can close the connection by right-clicking on an open end and calling the
Join menu command.
Example for the FBD Editor:
Example for the FBD Editor:
You should not use this tool to edit smaller circuit programs. In most cases you can optimize
the layout by repositioning the icons.
Applications and advantages
Large and complex circuit layouts may contain numerous line crossings, thus making it more
or less difficult to interpret the circuit. In such cases, the Cut/Join button is a highly effective
means of clearing up the circuit layout.
You can quickly jump to the partner connector by right-clicking the open end of a cut
You can quickly jump to the partner connector by right-clicking the open end of a cut
connection. This opens a shortcut menu, in which you can select the Go To Partner menu
command to jump to the partner end of the cut connection.
Another advantage of the Cut/Join tool is its utilization for circuits extending across more
Another advantage of the Cut/Join tool is its utilization for circuits extending across more
than one printable page, that is, across a page break. The connecting lines of two circuit
blocks which are shown on different pages are cut without cross-reference. However, if you
cut such connections using the Cut/Join tool you generate a cross-reference pointing to the
source or the connection target.
Example for the FBD Editor:
Example for the FBD Editor: