Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
Configuring LOGO!
8.1 Selecting parameter assignment mode
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
259
8.1.3
Modifying parameters
You first select the parameter you want to edit (Page 258).
You change the value of the parameter in the same way as you did in programming mode:
1. Move the cursor to the point at which you want to make the change: Press or
2. To change this value: Press or
3. To apply the value: OK
You change the value of the parameter in the same way as you did in programming mode:
1. Move the cursor to the point at which you want to make the change: Press or
2. To change this value: Press or
3. To apply the value: OK
Note
When changing the time parameter when the system is in RUN, you can also change the
When changing the time parameter when the system is in RUN, you can also change the
timebase (s=seconds, m=minutes, h=hours). This does not apply if the time parameter
topic). In this case you can neither change the value nor the timebase. The current time is
reset to zero when you change the timebase.
Current value of a time T
View of a time T in parameter assignment mode:
You can change the configured time T.