Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
Programming LOGO!
3.7 Writing and starting the circuit program
LOGO!
88
Manual, 06/2014, A5E33039675
8. Move the cursor to B2, the input of Q1, and confirm with OK.
9. Now replace block B2 with block B1 at output Q1.
– Move the cursor to the 2 in B2: Press
– Select 'B1': Press
– Apply 'B1': Press OK
– Select 'B1': Press
– Apply 'B1': Press OK
Result: LOGO! deletes block B2 from the circuit and connects the output of B1 directly to
output Q1.
3.7.9
Deleting block groups
Consider the case where you want to delete blocks B1 and B2 from the second circuit
program example (refer to the "Second circuit program (Page 82)" topic).
To delete these two blocks from that program, follow these steps:
1. Switch LOGO! to programming mode.
1. Switch LOGO! to programming mode.
(As a reminder, refer to the topic "The four golden rules for operating LOGO! (Page 61)").
2. To select "
①
": Press or
3. To confirm "
①
": Press OK
4. To select "
②
": Press or
5. To confirm "
②
": Press OK
(If required, enter your password and confirm with OK.)