Gentech N/A 15 W Gentech 15 W CLDS 803-51 データシート
製品コード
CLDS 803-51
Switching, Sensing and Control Solutions
from GENTECH INTERNATIONAL LTD
from GENTECH INTERNATIONAL LTD
Grangestone Industrial Estate, Girvan, Ayrshire KA26 9PS, United Kingdom
Telephone: +44 (0) 1465-713581. Fax: +44 (0) 1465 714974
Email: sales@gentech-international.co.uk
Website: gentech-international.co.uk
Telephone: +44 (0) 1465-713581. Fax: +44 (0) 1465 714974
Email: sales@gentech-international.co.uk
Website: gentech-international.co.uk
LDS SERIES
CLOSE DIFFERENTIAL
HORIZONTAL
LIQUID LEVEL SENSORS
HORIZONTAL
LIQUID LEVEL SENSORS
DESIGN
FEATURES
FEATURES
●
High and low level
sensing
sensing
●
Normally open or
normally closed operation
by rotating through 180°
normally closed operation
by rotating through 180°
●
Externally fitted via
compression grommet
compression grommet
●
Internal fitted M16
●
Close operate release
differential
differential
●
Housing materials nylon
6.6 or glass filled
polypropylene
6.6 or glass filled
polypropylene
●
Sealing washers and
materials suitable for a
wide range of chemicals
materials suitable for a
wide range of chemicals
●
Reed switch reliability
●
Temperature range up to
130°C
130°C
These contact ratings are for resistive loads. For
inductive, capacitive and tungsten filament lamp
loads refer to the circuit protection notebook.
inductive, capacitive and tungsten filament lamp
loads refer to the circuit protection notebook.
Environmental Specifications
Housing and Float Material (a)
Operating Temperature
Minimum SG
LDS3-Glass Filled Nylon 6.6 (b)
-30º to +130ºC
0.7
LDS8-Glass Filled Polypropylene (c)
-30º to +110ºC
0.7
a Detailed chemical resistance information for specific liquids is available on request.
b Higher temperature models available.
c For boiling water applications the maximum operating temperature limits are:- Continuous boiling water 80°C. Non continuous boiling water 100°C
b Higher temperature models available.
c For boiling water applications the maximum operating temperature limits are:- Continuous boiling water 80°C. Non continuous boiling water 100°C
Mechanical Specification
Mounting
Operate
Release
Shock
Vibration
Position
Angle
Angle
±30º from
Minimum 9º from
Maximum 11º from
50g for 11ms duration
35g up to 500Hz
horizontal
mounting angle
mounting angle
(reed switch only)
(reed switch only)
To MIL STD 202,
method 213A
Electrical Connections
CABLE OPTIONS
Standard cable is fitted with 2 x 18 AWG, 32/0.2mm stranded, with PVC insulation approved to UL/CAS/BS6361.
Double insulated cable fitted with 24/0.2mm stranded, with PVC insulation approved to UL/CAS/BS6500
Double insulated cable fitted with 24/0.2mm stranded, with PVC insulation approved to UL/CAS/BS6500
Operational Characteristics
Contact Configuration
SPST
Reed
Switch
Contact ratings maximum (resistive loads)
Volts DC
100
Volts AC
250
Amps
1.0
Watts
15
Minimum withstand across open contacts
Volts
800
Initial contact resistance
Ohms
0.25