BTR NETCOM 130C371200-I データシート
•
termination unit with one or two 8-pole RJ45 jacks for
mounting in cable duct
mounting in cable duct
•
component testing for Cat.6
A
to ISO/IEC 11801
Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-
568-C.2 (2009-08) and IEC 60603-7-51 Ed.1
(12/2008), certified to GHMT
568-C.2 (2009-08) and IEC 60603-7-51 Ed.1
(12/2008), certified to GHMT
•
compliance with class E
A
up to 500 MHz to ISO/IEC
11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
•
tested: components up to 600 MHz, link up to 800 MHz
•
for 10 GBit Ethernet (IEEE 802.3an)
•
suitable for Power over Ethernet (PoE, PoE plus and
UPoE)
UPoE)
•
ergonomically shaped LSA terminal block optimized for
HF technology
HF technology
•
screwing of the strain relief cover and shield
connection from the front
connection from the front
•
practical cable feed from 8 sides
•
connection of data lines AWG 26/1 to 22/1 (solid wire)
•
plug direction 45° downwards
•
compatible with "design" central units of switch lines
•
suitable for mounting in standard flush-mounted and
cavity wall casings
cavity wall casings
•
without cover parts
•
variants: 1 port, 2 ports