BTR NETCOM 130B11D21002-E データシート
Hinweis: Entfernen Sie vorsichtig eventuell vorhandene Stege
und Zapfen auf der Rückseite der Zentralplatte um die Montage
zu ermöglichen.
Note: Carefully remove any existing bars and cones on the
back of the central plate to allow the installation.
Schraube für Design-Zentralplatten
M2,5 x 6 mm (10 Stück)
895088
Screw for design central plates
M2.5 x 6 mm (10 pieces)
895088
Schraube für Design-Zentralplatten
M2,5 x 10,5 mm (10 Stück)
895089
Screw for design central plates
M2.5 x 10.5 mm (10 pieces)
895089
Ausführung Bestell-Nr.
Version P/N
Schraube M2,5
x
6 mm / 10,5 mm
Screw M2.5
x
6 mm / 10.5 mm
Kurze Schrauben M2,5 x 6 mm und M2,5 x 10,5 mm zur
Befestigung der Zentralstücke anderer Hersteller liegen nur den
UP0 Varianten standardmäßig der Verpackung bei!
Bei Verwendung vorhandener Anschlussdosen müssen die
Bei Verwendung vorhandener Anschlussdosen müssen die
Schrauben gesondert bestellt werden.
Short screws M2.5 x 6 mm and M2.5 x 10.5 mm to fasten
central pieces of other manufacturers are included only to UP0
wall outlets.
Screws have to be ordered separately when using already exi-
Screws have to be ordered separately when using already exi-
sting wall outlets.
Montage mit Zentralstück anderer Hersteller
Mounting with central pieces of other manufacturers
M2.5 x 6 mm
M2.5 x 10.5 mm
M2.5 x 14 mm
METZ CONNECT | Im Tal 2 | 78176 Blumberg | Germany
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch/Distributed by RIA CONNECT GmbH und/and BTR NETCOM GmbH
Montageanleitung siehe/Mounting instruction see www.metz-connect.com
Phone +49 7702 533-0 | Fax +49 7702 533-433
Vertrieb durch/Distributed by RIA CONNECT GmbH und/and BTR NETCOM GmbH
Montageanleitung siehe/Mounting instruction see www.metz-connect.com