Buffalo LinkStation 420 2TB P-LS420D0202-EU-3 データシート
![Buffalo](https://files.manualsbrain.com/attachments/9b1b53b017a12138833f39c4f8c1f2aa34c2c16e/common/fit/150/50/266e1b8b2619927602ffd298e5482e1aaec72f4e72045ee85919e6306019/brand_logo.png)
製品コード
P-LS420D0202-EU-3
Using your LinkStation
LinkStation User Manual
58
Format a Drive
•
A format deletes all data from a hard drive. Be careful! Back up any important data on a
drive before formatting it. It will take several minutes to format a hard drive.
•
Shared folders cannot be accessed during formatting.
•
Do not turn off the power switch or disconnect power while formatting a hard drive.
•
If the Power Mode Switch is set to AUTO, then the LinkStation will turn off when the for-
mat is finished.
•
To erase all data on a disk, choose [Disk Management] - [Erase Disk].
3
1
2
In the Web Admin interface, navigate to [System] -
[Storage].
[Storage].
1 Select the drive to format.
2 Click [Format Disk].
Click [Format].
4
5
The [Confirm Operation] screen will be displayed. Type the displayed number into the
[Confirmation Number] field within 60 seconds, then click [Apply].
[Confirmation Number] field within 60 seconds, then click [Apply].
Follow the instructions displayed on the screen.