DeLOCK 87588 ユーザーズマニュアル

-

-

This Delock network switch can be used for connection of up to 4 devices to the 

RJ45 port and thus you can connect your devices by another port to your LAN. 

By using one of the 4 buttons you can manually select which device should be 

connected to the LAN. Therefor you do not need a power supply.

• Connector: 

Input: 4 x RJ45 Ethernet female

   

 

Output: 1 x RJ45 Ethernet female

• Data transfer rate:

    Ethernet up to 10 Mb/s (Half/Full Duplex)

    Fast Ethernet up to 100 Mb/s (Half/Full Duplex)

• Supports Half / Full Duplex mode

• Supports Auto MDI- / MDI-X

• Supports back-pressure (Half Duplex) and flow control (IEEE 802.3x)

• 4 mechanical buttons

• Metal housing

• Dimension (LxWxH): ca. 12 x 8.4 x 2.9 cm

• Colour: beige

• A free RJ45 port

• Switch, user manual

• Protect the product against moisture

• Protect the product against direct sunlight 

1.  Connect the output port oft the Ethernet switch with a Ethernet port of your 

network e. g. on your Router, by using a RJ45 cable (Cat5/5e/6)

2.  Connect the Ethernet devices to the input ports of the Ethernet switch.

3.  To switch from one to another input device use the appropriate button on the 

front side.

If you have further questions, please contact our customer support

support@delock.de

Information and data contained in this manual are subject to change without notice 

in advance. Errors and misprints excepted.

Edition: 09/2012