Gigabyte G-Power II 24TPS-U22PCK-B1R プリント

製品コード

24TPS-U22PCK-B1R

Universal design, supports LGA775 & AMD K8 / AM2 platform.

Curve design combines CPU and MOSFEAT cooling together.

9CM silent fan with PWM function, highest fan speed can reach 2300RPM.

Highly heat conducting heat pipe, provides extreme cooling performance.

Pure copper base with aluminum fin, extra large heat dissipation area allows heat been carried away faster.

Hassle-free installation.

STEP 3

STEP 4

STEP 5

Before installation, please make

sure the pin is on the right

direction. (as Figure A)

Plug the 4-pin connector of the

cooler into the motherboard’s CPU

fan socket.

Align the pin of the cooler with

the hole of the CPU on the

motherboard and push down

the pin diagonally.

Please make sure the four pins

are firmly secured.

To remove the cooler, turn the four

pins to the removing direction and

pull them up.(as Figure B)

The followings are not covered by the warranty :

Use the product incorrectly or in a manner other than the designed purpose.

Nonobservance of the proper operation. ( e.g. over-clocking )

Malfunction due to interference from other devices.

Unauthorized modification of the product.

Malfunction due to unfit specifications on Motherboard.

Malfunction arising from casualties ( earthquake, thunder, fire, and flood ).

The cooler fan speed levels provided are for reference use only.

Please refer to the motherboard BIOS to verify actual fan speed levels.

Dimension : 102 x 122 x 139 mm
Fan Dimension : 90 x 90 x 25 mm
Heat Pipe : 3
Base Material: Copper
Fin Material : Aluminum
Rated Voltage : 12 V
Rated Current : 0.2 Amp
Fan Speed : 2,300 rpm
Noise Level : 25dBA
Bearing Type : EBR
Fan Life Expectancy : 30,000 hr

AMD K8 / AM2 Clip

AM2/K8 Bracket

LGA775 Bracket

screws x 2

Apply some thermal grease on

the CPU properly.

STEP 2

Place the 775 bracket between the

copper base and the cooler unit.

Align the holes of the bracket with

the holes of the copper base. Secure

the 775 bracket with supplied

bracket screws. Make sure the screws

are evenly and firmly fastened.

Thermal grease

Installation Guide

GH-PSU22-PC

STEP 1

STEP 3

Lock the tab on one side of AMD

K8 / AM2 clip in the salient point

of the CPU cooler.

Lock the tab on the other side of

AMD K8 / AM2 clip in the salient

point of the CPU cooler bracket;

push down and secure the bar on

the clip firmly.

STEP 4

STEP 5

Plug the 4-pin connector of the

cooler into the motherboard’s

CPU fan socket.

STEP 2

Apply some thermal grease on

the CPU properly.

Caution :

Before installation, please turn off the

power, unplug the power cord, and

be sure to remove the sticker from the

bottom of the cooler unit.

Place the AM2/K8 Bracket between

the copper base and the cooler unit.

Align the holes of the bracket with

the holes of the copper base. Secure

the AM2/K8 Bracket with supplied

bracket screws. Make sure the screws

are evenly and firmly fastened.

Features

The product’s warranty label has been removed or damaged.

The devices inside, including power supply, hard disk, CD-ROM drive,

motherboard, cooler, etc, are not detached from the chassis prior to the
transportation of the computer product, resulting in damage to the cooler
or computer-related devices.

Any damage caused by nonobservance of the installation instruction contained

in this manual.

Specification

Intel

Core

2 Extreme Processor Series

Intel

Core

2 Quad Processor Series

Intel

Core

2 Duo Processor Series

Intel

Pentium

Extreme Edition Series

Intel

Pentium

D Processor Series

Intel

Pentium

4 Processor Series (LGA775)

AMD AM2
AMD Athlon

FX Series

AMD Athlon

64x2 Series

AMD Athlon

64 Series

AMD Sempron Series

Compatible CPU

Accessories

STEP 1

LGA 775 Platform Installation

AMD K8 / AM2 Platform Installation

Caution :

Before installation, please turn off the

power, unplug the power cord, and

be sure to remove the sticker from the

bottom of the cooler unit.

Figure A

Figure B