Auerswald COMfortel 3200 90112 ユーザーズマニュアル
製品コード
90112
Commissioning
62
COMfortel 3200/3500 - Firmware Version 1.6A - Commissioning Instructions 03 01/13
Steps to Take
1.
Switch the PC on.
2.
Insert a plug (RJ-45) of the patch cable into the jack labelled with
on the
lower side of the telephone.
Important: If you connect a PC to the socket on the bottom of the
telephone that is labelled with
telephone that is labelled with
, this will result in disruptions in operation.
씮
Take note of the socket labels.
3.
Insert the other plug (RJ-45) of the patch cable into the network connection
port of your PC.
port of your PC.
Configuring the Telephone via the Configuration Manager
Requirements
– Existing network connection between the PC and the telephone
– Knowledge of the IP address of the telephone (can be queried under All
apps > Settings > Ethernet)
– For the operation as system telephone: Knowledge of the admin user name
and of the admin password of the Auerswald PBX
Steps to Take
1.
Start a browser (for example, Mozilla Firefox).
2.
Enter the IP address of the telephone in the address field/address bar of the
browser (for example, http://192.168.178.4).
browser (for example, http://192.168.178.4).
The login window opens.
Note: If operated as standard VoIP telephone: If you start the configuration
manager for the first time, a dialogue box will be opened in a first step which
serves to set the user name and the user password. Enter these parame-
ters as requested.
manager for the first time, a dialogue box will be opened in a first step which
serves to set the user name and the user password. Enter these parame-
ters as requested.
3.
Under User name and Password, enter the following parameters.
쐽
If operated as a system telephone: the admin user name and the admin
password of the PBX.
password of the PBX.
쐽
If operated as standard VoIP telephone: the user name and the pass-
word for the telephone.
word for the telephone.