Jj Joujye NU-0528e-B Mini-ITX Computer Case 2x USB, 1x Line-In, 1x Line-Out External Slots 1 Internal Slots NU-0528i-CR データシート

製品コード

NU-0528i-CR

ECE0528i/ECE0548i Mini-ITX Chassis

RISER CARD & FRONT 2.5” HDD ASSEMBLY

(1) With Riser Card Expansion system integration, -

The Slim ODD+2.5”HDD Bay and/or 3.5” HDD Bay are no

longer installable due to space limitation in the smaller

dimensioned Mini-ITX Chassis.

(2) To install the Riser Card, -

Break off and remove the ‘Punched-but-not-perforated’

Slot Cover (For Standard PCI Card) from the Rear Panel,

Unscrew and take out the Card Holder Bracket.

Insert the Riser Card into the Motherboard’s PCI Slot and,

Use 2 pcs of 6-32*L6 Hexagon Head Screws to secure the

Riser Card on the Center Bar.

(3) Insert your Expansion Card horizontally into the PCI Slot of

the Riser Card.

Fit back the Card Holder Bracket on the Rear Panel and, -

Use 1 pc of 6-32*L6 Hexagon Head Screw secure the Card

Holder Bracket on the Rear Panel.

(4) With Riser Card expansion system integration, -

1 pc of 2.5" HDD is installable on the inner side of the Steel

Front Panel.

Note: This installation of the 2.5" HDD would obstruct and

invalidate the Card Reader integration.