Sony BDV-N5200W BDVN5200WB データシート
製品コード
BDVN5200WB
25
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\040GET.fm
(PMRF 02)\4485800131_GB (CEK)\040GET.fm
masterpage:
Right
Getti
ng Started
Rear of the main unit
• Be sure to fully extend the FM wire
antenna (aerial).
• After connecting the FM wire antenna
(aerial), keep it as horizontal as possible.
If you have poor FM reception, use a
75-ohm coaxial cable (not supplied) to
connect the main unit to an outdoor FM
antenna (aerial).
75-ohm coaxial cable (not supplied) to
connect the main unit to an outdoor FM
antenna (aerial).
Step 3: Preparing for
Network Connection
Network Connection
To connect the system to your network,
perform [Easy Network Settings]. For
details, see “Step 5: Performing the Easy
Setup” (page 27).
perform [Easy Network Settings]. For
details, see “Step 5: Performing the Easy
Setup” (page 27).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network
by making the network settings.
can connect the system to the network
by making the network settings.
• If you use a wired LAN
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
(100) terminal on the main unit.
We recommend that you use a shielded
and straight interface cable (LAN cable).
and straight interface cable (LAN cable).
Connecting the antenna
(aerial)
(aerial)
Note
Tip
FM wire antenna (aerial)
(supplied)
(supplied)
or
Tip
Tip
Broadband router
LAN cable (not supplied)