Caso K3 3200 データシート

製品コード
3200
ページ / 38
  
 
caso Küchenwaage K
3
 12 
 Operating Manual 
9.1 General 
Please read the information contained herein so that you can become familiar with 
your device quickly and take advantage of the full scope of its functions. 
Your food processor will serve you for many years if you handle it and care for it 
properly. We wish you a lot of pleasure in using it! 
 
9.2  Information on this manual 
These Operating Instructions are a component of the food processor (referred to 
hereafter as the Device) and provide you with important information for the initial 
commissioning, safety, intended use and care of the device. 
The Operating Instructions must be available at all times at the device. This 
Operating Manual must be read and applied by every person who is instructed to 
work with the device: 
• Commissioning 
• Operation 
• Troubleshooting 
and/or 
• Cleaning 
Keep the Operating Manual in a safe place and pass it on to the subsequent owner 
along with the device. 
9.3 Warning 
notices 
The following warning notices are used in the Operating Manual concerned here. 
 
DANGER 
A warning notice of this level of danger indicates a potentially dangerous 
situation. 
If the dangerous situation is not avoided, this can lead to death or serious injuries. 
►  Observe the instructions in this warning notice in order to avoid the danger of 
death or serious personal injuries. 
 
 
WARNING 
A warning notice of this level of danger indicates a possible dangerous 
situation. 
If the dangerous situation is not avoided, this can lead to serious injuries. 
►  Observe the instructions in this warning notice in order to avoid the personal 
injuries. 
 
 
ATTENTION 
A warning notice of this level of danger indicates a possible dangerous 
situation. 
If the dangerous situation is not avoided, this can lead to slight or moderate injuries. 
►  Observe the instructions in this warning notice in order to avoid the personal 
injuries. 
 
 
PLEASE NOTE 
A notice of this kind indicates additional information, which will simplify the handling 
of the machine.