Caso K3 3200 データシート

 

caso Küchenwaage K

3 

    

 

17

 

The system is under the state of time. Press „MODE“ for a while. 

 

Minute will twinkle on the display, 

then press „g/Oz“ 

         slightly, setup the minutes.  

 

Press „MODE“ slightly, hour will twinkle on the display. 

Press „g/Oz“ 

slightly, setup the hours. 

 

After finishing the setting, press „MODE“, then the LCD  

         display shows the new time. 

 

The system is under the state of time. Press „MODE“to enter countdown timer setting 
state, „TMR” will appear on the display. Press “MODE” for a while and the 

seconds will twinkle on the display, 

 then press „g/Oz“ slightly to setup 

the seconds.  

Press „MODE”, the minute will twinkle on the display. 

Press „g/Oz“ 

slightly, setup the minutes. 

 

After finishing the setting, press „MODE“, to count the time. After finishing the 
countdown “00:00” will appear on the LCD display.  

An alarm signal is send out. Press “MODE” slightly to stop the alarm.  

Then press „MODE“ and return to the state of time. 

 

To set the timer back to zero, press „g/Oz“ for a while. 

Press the key „g/Oz“ you can select between „g“ and „oz“. 

When the scale is overloaded, „Err“ will appear on the display.