ABUS IR 2.4GHz TVAC15010 データシート

製品コード
TVAC15010
ページ / 52
 
 
12
 
English 
Icon explanation 
 
 
A flash in the triangle is used if there is danger for the health, e.g. by an electric shock. 
 
An exclamation mark in the triangle points to an important note in this user manual which 
must be minded. 
 
This symbol can be found when you are to be given tips and information on operation. 
 
 
Important safety advice 
 
 
The warranty will expire for damage due to non-compliance with these operating 
instructions. ABUS will not be liable for any consequential loss! 
 
ABUS will not accept liability for damage to property or personal injury caused by 
incorrect handling or non-compliance with the safety-instructions.  
In such cases the warranty will expire.
 
The device has been manufactured in compliance with international safety standards. Please read these 
safety advices carefully. 
 
Safety advice 
 
1. Mains 
supply 
100–240 V AC, 50–60 Hz (via power adapter plug to 5 V DC) 
Operate this product only from the type of power supply indicated on the marking label. If you are not sure 
of the type of power supplied to your home, consult your local power company. Disconnect the product 
from the mains before you start any maintenance or installation procedures.
 
 
2. Overloading 
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
 
 
3. Liquids 
Protect the device from any kind of liquids entering. 
 
4. Cleaning 
Disconnect the product from the wall outlet before cleaning. Use a light damp cloth (no solvents) to dust 
the product. 
 
5. Accessories 
Do not use any unsupported accessories as these may be hazardous or cause damage the product. 
 
6. Location 
•  This device can be used in inside as well as outside.  
•  The product will be damaged even it falls from a low height. 
•  During the installation of the camera please take care that direct sunlight cannot fall onto the 
image sensor of the device. Please follow the installation instructions in the corresponding 
chapter of this user manual.  
•  Do not place the device near a radiator or heat register. 
•  Setup the device only in areas with the advised operating temperatures of -10° ~ 50°C.