Apem 6-641H/2 6A Toggle Switch, 6-641H/2 データシート

Toggle switches - high amperage

❑  

Terminal and contact support are manufactured from a single piece of metal. The 
contacts are resistance-welded to the terminal for increased mechanical strength.

❑  

These switches are suitable for motor loads and power applications up to
15A 250VAC or 10A 400VAC

❑  

❑  

• Max. current/voltage ratings : see tables below

• Peak current : 30A max. during 1/2 sine, 250VAC

• Initial contact resistance : 10 mΩ max. at 1A 2VDC

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength :

2.000 Vrms 50 Hz min. between terminals

2.500 Vrms 50 Hz min. between terminals and frame

• Electrical life : 10.000 cycles at full load

- FOR INFORMATION-

Max. current/voltage rating w. resistive load

ON - OFF

ON - ON

15A 250VAC

10A 24VDC
15A 12VDC

10.000 cycles

Other

15A 125VAC
12A 250VAC

5A 25VDC

10.000 cycles

ON OFF ON

15A 250VAC

6.000 cycles

Models for peak currents
Models 600SH and 600SNH with silver
cadmium oxide contacts are discontinued.
They will be replaced by switches with silver
tin oxide contacts.

Functions

Ratings

Electrical life

MODELS

Single and

double pole

Three pole

FUNCTIONS

ON - OFF (1)

ON - ON (6)

Other

(4-7-8-9)

ON - OFF (1)

& ON - ON (6)

Other

(4-7-8-9)

10A  1/2 HP

125-250VAC

15A  1/2 HP

125-250VAC

10A  1/2 HP

125-250VAC

600H - 600NH

NF-VDE

UL

UL 1054

CSA

CSA 22-2

EN 61058-1

15A  1/2 HP

125-250VAC

10(4)A

400VAC

T 85/55 (600H)

T 125/55

(600NH)

• Case : polyester UL94-V0

• Actuator :

- 600H : brass, nickel plated

- 600NH : black polyamide

• Bushing : brass, nickel plated

• Contacts : silver/nickel alloy

• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut

• Panel thickness : 4,5 mm (.177) max. between 2 nuts

• Operating temperature : -20°C to +55°C