Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 データシート
製品コード
1-F8075
62
<Functions of System Menu>
● Select the function name
and return to the System
menu by touching the
R T N b u t t o n . O r t h e
H O M E / E X I T b u t t o n i s
pushed.
<SensorTouch™>
RETURN
● Lock release
Every lock function's touch [ 1 second
or more ] of S1 button will release the
lock.
● Lock release
● Lock release
Every lock function's touch [ 1 second
or more ] of HOME/EXIT button will
release the lock.
● Manual lock
If S1 button is touched 1 second
or more from a HOME screen, a
SensorTouch locks manually.
● Manual lock
If HOME/EXIT button is touched 1
second or more from a HOME screen,
a SensorTouch locks manually.
● Display of a lock
If locked, there will be sound and the
icon of a key will come out.
Auto lock method
1. Open the Auto lock screen in the system
menu.
2. Adjust the activation timer for the Auto
Lock function. The timer will begin counting
immediately when the HOME screen is not
used. The timer is adjustable in one second
increments up to 30 seconds. If the timer
value is OFF, this function is not applicable.
3.The Start Lock setting will, if enabled,
automatically lock the T14SG when the
transmitter is powered up. To allow access to
the transmitter's functions, press and hold the
S1 key for one second.
*If neither the Lock Timer or Start Lock functions are active
(OFF), then the key lock remains even if the power is turned
off.
*If the Lock Timer is enabled and the Start Lock is off, the key
lock status is canceled each time the T14SG is turned on.
The Auto Lock function makes it possible to lock
the transmitter to prevent any unwanted input from
your hands while flying.
The auto lock function can be set in two ways.
LOCK TIMER
LOCK TIMER
Auto Lock functions automatically when there is
no operation from the HOME screen display for a
chosen number of seconds.
START LOCK
Auto Lock functions automatically when the
model changes or power is turned on.
*To temporarily allow access to the T14SG programming
press and hold the S1 or HOME/EXIT bitton for one second.
Please note, the Auto Lock function timer will resume
immediately once again.
AUTO LOCK
The automatic lock function of two kinds of SensorTouch
Danger
It is recommended to Lock the
SensorTouch during flight, to prevent
any accidental touches which could
change settings and cause an accident.