Canon DR-F120 9017B003 データシート

製品コード
9017B003
ページ / 77
29
Standard Scanning
Click the Select document and Output panels, and then click the 
[Scan] button to scan the document. You can select the scan 
method according to the document type and purpose of use before 
scanning.
Scanning Shortcut
You can register in advance combinations of frequently-used 
document selections and output methods as a "Scanning Shortcut". 
Just click the Scanning shortcut panel to implement the scan.
Start button
"Scanning shortcuts" are allocated to the scanner start button in 
advance. Set the document and press the Start button to start the 
scan. You can also allocate your own shortcuts to the start button.
Starting and Exiting CaptureOnTouch
By default, CaptureOnTouch becomes resident in the system when 
you start your computer.
Double-click 
 (CaptureOnTouch icon) in the taskbar to start 
CaptureOnTouch and display the main window.
 You can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-xxx] - [DR-xxx CaptureOn-
Touch].
 The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see "Environmental Settings" on p.45.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click 
 at the top of the 
window. This closes the window, but CaptureOnTouch will continue 
to reside in the system.
To quit the CaptureOnTouch application, click 
 (CaptureOnTouch 
icon) in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the 
icon disappears from the taskbar.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the 
system, use one of the following procedures to restart it.