Canon DR-F120 9017B003 データシート

If [Edit after scanning] is disabled in the scanning shortcut settings, 
the edit window will not be displayed.

Click the [

] button to edit the output settings. -> "Setting the output"

Click the [Cancel] button to discard the scanned image and return to the
main window.

When the output has finished, a popup window will be displayed. If 
saving the scanned image, a link to open the save destination folder 
will be displayed. 
This completes the shortcut scans.

If you click [Open storage folder], the folder in which the saved 
scanned images were saved opens. Depending on the output 
settings, the [Open storage folder] button may not be displayed.

"Scanning shortcuts" are allocated to the scanner start button in 
advance.
You can set frequently-used scans to the scanning shortcuts, and 
then allocate them to the start button.

If you place the document and press the Start button, 
CaptureOnTouch starts and scanning starts.

 If the [Do not display the main screen when the scan is started

with the scanner button] checkbox is enabled in the Environ-
mental settings, the main CaptureOnTouch window will not be
displayed when a scan is started from the start button. Only dia-
log boxes and error messages during scanning, and completion
popup windows are displayed.

 If the [Do not display the main screen when the scan is started

with the scanner button] checkbox is enabled in the Environ-
mental settings, [Enable additional scan] and [Edit after scan-
ning] will be disabled when scanning is started from the start
button.