ION Audio LP2CD データシート
7
8. Select
the
Audio tab at the
top of the Sounds and Audio
Devices control panel.
9. Under Sound Playback,
choose your internal sound
card as the default device.
This varies by computer but
should not be set to “USB
should not be set to “USB
Audio Codec, Modem, or
Microsoft Sound Mapper.”
10. Under
Sound Recording,
select USB Audio Codec
for your default device –
this is the USB turntable.
11. Check the box titled Use
only default devices.
12. Click
Apply (if possible), then click OK.
13. Make sure that your computer’s speakers (if not built-in) are
plugged into your computer’s audio output and turned on so you
can hear your recording. If your computer has a headphone
output, you can use headphones in-place of speakers.