ABUS 2-Zone alarm system Conrad Alarm zones 2 Conrad データシート

Permanently lit

- Error in alarm

- Error in alarm zone 1 or 2:

zone 1 or 2

Check the sensor connections of
alarm zones 1 or 2 and their 
sensors

- Sensor was 

- A sensor was triggered:

triggered

Check the connected sensors.
Check if windows or doors are
opened where a door/window
detector (=magnetic contact) is con-
nected. 

- Alarm system was

- After the alarm system has triggered

not disarmed

an alarm and the

after an alarm 

acoustic signalling duration
(= approx. 3 minutes) has passed,
the alarm message is stored and
optically indicated by a permanently
lit status LED. In this case, check all
sensors and the connection of
alarm zones 1 and 2 to determine
the cause that triggered the alarm.
Then  disarm the alarm system by
setting the “mode selection switch”
to “OFF”.

37