Siemens 6GK7242-7KX30-0XE0 ユーザーズマニュアル

ページ / 108
Application and properties 
 
1.6 Configuration examples 
 
CP 1242-7 
14
 
Operating Instructions, 03/2012, C79000-G8976-C247-03 
Program blocks (instructions)   
For productive communication, the telecontrol instructions are required. 
For TeleService, the telecontrol instructions are not necessary. 
The telecontrol instructions execute on the CPU. They are made available with the 
"HSP CP1242-7" support package in STEP 7. For a description of the instructions, refer to 
Software for communication with a telecontrol server 
The CP is configured in "Telecontrol" mode. 
●  The telecontrol server requires the "TELECONTROL SERVER BASIC" software. 
For the documentation, see /2/ (Page 100) in the References. 
Software for TeleService functions 
●  STEP 7 including the support package "HSP CP1242-7" 
For the current version, see above in the section "Configuration software". 
●  For the switching station: 
–  For configuration with telecontrol server: 
The "TELECONTROL SERVER BASIC" software 
–  For configuration without telecontrol server   
The "TS Gateway" software 
The software and the manual describing it are on the DVD that ships with the CP. For 
the documentation, see /3/ (Page 100) in the References. 
Requirements for using GSM services 
●  A contract with a suitable GSM network provider 
–  The contract must allow the transfer of data using GPRS. 
–  The contract must allow the assignment of public IP addresses. 
–  If there is to be direct communication between GPRS stations ("GPRS direct" mode), 
the GSM network provider must assign fixed IP addresses to the CP 1242-7 and 
forward the frames to the destination subscribers. 
●  The SIM card belonging to the contract 
The SIM card is inserted in the CP 1242-7. 
●  Local availability of a GSM network capable of GPRS in the range of the station 
1.6 
Configuration examples 
Below, you will find configuration examples for stations with a CP 1242-7.